STORAGE & INSTRUMENT CABINETS

• Stainless Steel Construction
  
• Accessory Cabinet with Peg Board and Hooks
  
• Storage Cabinet with Adjustable Shelves and Shatter-Proof Glass
  
• Desk Cabinet with Light and Four Lockable Drawers with Ball Bearing Slides
  
• Supply Cabinet with Adjustable Shelves
  
• Solution Warming Cabinet with Heated & Storage Compartments

Dimensions:

• Surgical Table Accessory Cabinet (SC1) : 36" or 48" wide x 60" high x 18 or 24" deep
  
• General Storage Cabinet (SC2) : 36" or 48" wide x 60" high x 18" or 24 " deep
  
• Desk Cabinet (SC3) : 24" wide x 60" high x 18" or 24" deep
  
• Miscellaneous Supply Cabinet (SC4) : 24" wide x 60" high x 18" or 24" deep
  
• Solution Warming Cabinet (SC5) : 24' wide x 60" high x 18" or 24 " deep
  
• Computer Charting Work Station (SC6): 36" or 48" wide x 60" high x 18" or 24 " deep
  
• Instrument Cabinets (IC Series) : 24 ", 30 ", 36 ", 42" or 48" wide x 20" or 24 " deep x 80" high

Construction
CMP Operating Room Storage Consoles are comprised of one or more of following modules arranged in battery to accommodate needs of particular hospital operating room. Each console shall be constructed of Type 304 stainless steel with No. 4 finish. All exposed welds are done by Heliarc process and ground and polished to match No. 4 finish.

SURGICAL TABLE ACCESSORY CABINETS have interior back and two sides covered with 1/4" (6 mm) thick tempered removable pegboard and 24 chrome-plated hooks. Their stainless steel, hinged, double-pan, sound-deadened doors have chrome plated handles and a stainless steel bracket with three removable and laterally adjustable stainless steel hooks on the inner panel.

GENERAL STORAGE CABINETS have one fixed bottom shelf and three adjustable intermediate shelves for storage of surgical products. They have two full-height, hinged, glazed doors with chrome plated knob handles and a stainless steel frame. The doors have1/4" (6 mm) thick shatter-proof, safety glass panes. Glass-pane doors are available for both sides of the unit as "pass-through" feature, providing access to the contents of the cabinet from the corridor side.

DESK CABINETS have an open upper portion with a sloped, stainless steel writing surface that has a cork bulletin board at the rear. A recessed fluorescent light with switch is located at the front of cabinet ceiling and the lower portion of the cabinet has four double-pan stainless steel drawers mounted on ball bearing slides with lock and chrome-plated handles.

MISCELLANEOUS SUPPLY CABINETS contain one fixed bottom shelf and three adjustable intermediate shelves. A full-height, hinged, glazed door with a chrome-plated handle is provided. A glass-pane door shall also be available for both sides of the unit as "pass-through" feature, providing access to the contents of the cabinet from the corridor side.

INSTRUMENT CABINETS have four full-width and
depth shelves with edges turned down and under to form channels. The shelves are adjustable on full height stainless steel pilaster strips and rest on stainless steel clips. Full-view doors allow complete visual inspection without blind areas caused by cross pieces.The doors have chrome plated knob handles and a stainless steel frame and incorporate 1/4" (6 mm) thick shatter-proof, safety glass panes. Glass-pane doors shall also be available for both sides of unit as a "pass-through" feature for access to the contents of the cabinet from the corridor side.

Options:

• Recess Mounted or Free-Standing
  
• Sloping Dust Top.
  
• Pedestal Base for Floor Mounting the Cabinet(s)
  
• Doors Hinged Left Side or Right Side (for cabinets with single doors)

CMP makes many different styles of stainless steel cabinets, tables, sinks, ice stations,etc. We have included information about a few of these below. If you don't see what you need, or you have other questions, please contact us.

Continental Metal Products Co., 35 Olympia Avenue, Woburn, MA 01888. Tel: 617-965-8066; Fax: 617-964-5187.